Data centre

Server Parking

Leave your own machine in our data centre and rent only the space, power and link.

Overview

When a rack is too much and home is too risky

Server parking lets you place servers in the data center by the U. Start with just what you need instead of renting a whole rack, and run reliably on the power, cooling, and network of a proven IDC.

Start small

Move in from a single server (1U), keeping upfront cost low.

You can ship it by courier

Bring it in yourself or ship it. When it arrives, LETO mounts it in the rack and connects power and network.

0.3–0.8kW

Power is included

Power up to the amount set for each unit is included in the price.

A shared line is included

Each unit comes with a shared line and public IP. Add IP Transit separately if you need guaranteed bandwidth.

Upgrade to a rack

As your hardware grows, expand smoothly to 1/4, 1/2, or full-rack colocation.

Use cases

A good fit for

  • Personal & side projects

    When you'd rather run that one server in a secure data center than at home.

  • Small services

    For small services that need stable rack space but not a whole rack.

  • Dev & test

    Keep always-on dev, test, or CI servers at a sensible cost.

  • Backup & secondary

    Place a disaster-recovery backup node or secondary server at a separate site.

Plans

Pick a unit to see the monthly price

Rented by the U from 1U. Listed prices are public estimates, VAT excluded.

Unit

2U

Power
0.5kW
Network
Shared 100Mbps
Public IP
IPv4 1

₩120,000/mo

Listed prices are estimates for standard configurations, VAT excluded. Traffic policy, additional IPs, or excess power may change the quote.

Facility

Park one server, same infrastructure

Even by the U, power, cooling, security, and monitoring run on the same infrastructure as rack colocation.

  • 01

    Redundant power

    UPS and emergency generators deliver uninterruptible power so your server stays up through outages.

  • 02

    Precision climate control

    Steady temperature and humidity keep your equipment in optimal conditions.

  • 03

    Physical security

    Access control and 24/7 CCTV block unauthorized access and protect your equipment.

  • 04

    24/7 monitoring & remote hands

    The NOC monitors around the clock, and remote hands handle reboots and checks without a site visit.

How it works

How you hand over a server

  1. 1Send the server

    Bring it in yourself or ship it by courier.

  2. 2Rack installation

    When it arrives, LETO mounts it in the rack and connects power and network.

  3. 3Access details

    Once it is connected, we send you the access details.

  4. 4Operations

    Remote hands handle reboots and simple checks. For part replacement we schedule a visit.

FAQ

Frequently asked questions

What people check most before leaving a machine with us.

  • Bring it yourself or ship it. When it arrives we rack it, connect power and the network, and send you the access details.

  • Each unit includes power up to the stated figure. Tell us in advance if your build goes over and we requote. The table assumes a standard configuration, so traffic policy and extra IPs can change the quote too.

  • Reboots and simple checks are handled by remote hands, so you do not have to travel. For work that genuinely needs your hands (a part swap, say), we book you a visit.

  • You move to quarter, half or full rack colocation. It is the same data centre, so the link and the IPs carry over.

  • Unit rental comes with a shared link. If you need committed bandwidth we set it up separately as IP Transit.

Not sure where to put that server?

Tell us your equipment and required specs, and we'll propose the optimal unit and configuration.